Powerplus POW306552 Instruções de Operação descarregar pdf (Página 8)

POW306552 EN

9 CLEANING AND MAINTENANCE

9.1 Cleaning

§ Keep the ventilation slots of the machine clean to prevent overheating of the engine.

§ Regularly clean the machine housing with a soft cloth, preferably after each use.

§ Keep the ventilation slots free from dust and dirt.

§ If the dirt does not come off use a soft cloth moistened with soapy water.

Never use solvents such as petrol, alcohol, ammonia water, etc. These

solvents may damage the plastic parts.

10 TECHNICAL DATA

Voltage / frequency charging unit 230 V / 50 Hz

Rated Voltage 18 V

Rotation speed 1

gear 0-350 rpm

Rotation speed 2

gear 0-1250 rpm

Torque positions 24

Max. drill capacity 10 mm

Charger time 1 hour

Battery capacity 1300 mAh

Battery type Ni-CD

Max. torque 15 Nm

Drill capacity concrete /

Drill capacity steel 10 mm

Drill capacity wood 20 mm

Chuck type Sanou keyless chuck

Number of speed settings 2

11 NOISE

Noise values measured according to relevant standard. (K = 3)

Acoustic pressure level LpA 74 dB(A)

Acoustic power level LwA 85 dB(A)

ATTENTION! The sound power level may exceed 85 dB(A), in this case

individual hearing protection shall be worn.

aw (Vibration) 6.5 m/s² K = 1.5 m/s²

12 SERVICE DEPARTMENT

§ Damaged switches must be replaced by our after-sales service department.

§ If the connecting cable (or mains plug) is damaged, it must be replaced by a particular

connecting cable which is available from our service department. Replacement of the

connecting cable must only be carried out by our service department (see last page) or by

a qualified person (qualified electrician).

1 2 3 4 5 6 7 8 9 10

Sem comentários

Powerplus POW306552 Instruções de Operação Página 8